How to Mount Zebra Shades on the Brackets

Video Description

Ready to finish your installation? This guide shows the exact steps to mount the zebra shade cassette onto the installed brackets. You’ll learn bracket orientation, how to hook the cassette lip, and how to press until you hear the click that locks everything in place. Works for most dual/banded zebra shades with snap-in bracket styles.

Prefer a softer, all-sheer look? Explore our complete line of Sheer Fabric Shades for airy light diffusion.

What You’ll Need

Installed left/right brackets (and center support for wide shades)

Shade with cassette headrail design.

Step stool; both hands free for an even snap-in.

Mounting the Shade — Snap-in Clip Brackets

Center & lift: With one hand near each cassette end, hold the shade just below the brackets, centered in the opening.

Hook the rear lip: Tilt the top of the cassette toward the window and engage the cassette’s back/top lip onto the rear tabs of all brackets at once.

Rotate to lock: Rotate the front of the cassette upward toward the room until each front clip clicks. Run your fingers along the headrail to confirm every bracket is fully engaged.

Check level: The bottom bar should sit level. If it looks tilted, re-seat and re-click.

Center Support (Wide Shades)

For wide cassettes, a center support prevents flex and ensures a straight, quiet roll. Seat the cassette on the side brackets first, then press at the center until it snaps/locks just like the ends.

Final Steps

Loop systems: If you have a continuous chain/loop, mount the tensioner so the loop is anchored and taut (child-safety requirement).

Motorized: Connect power, pair the remote/app, then set upper/lower limits and test a full cycle.

Alignment test: Roll to align sheer-to-sheer for view; roll further to overlap opaque bands for privacy.

Removal (Service/Painting)

Snap-in clips: Insert a small flathead at the front clip to release while supporting the cassette; rotate and lift off the rear tabs.

Troubleshooting

No click: Brackets may be out of plane. Re-level/re-square, then re-seat and press firmly until you hear/feel the click.

Fabric drifts (telescopes): Re-check bracket parallel, re-seat cassette, and run full cycles. If your model has an end-plug tracking screw, adjust in tiny increments per the manual.

Chain slack: Re-mount the tensioner so the loop stays taut and straight.

Want sheer-only diffusion with no banding? See our full line of Sheer Fabric Shades, or request free swatches to compare fabrics at home.

Zebra Shade Mounting — FAQs

How do I know the cassette is fully seated on the brackets?

You’ll feel and hear a distinct click at each bracket. Run your hand along the headrail—there should be no gaps. The bottom bar should hang level when you roll the shade down a few inches.

Do I need a center support bracket?

For wider cassettes, yes. A center support prevents flex and vibration and helps the fabric track straight. Seat the side brackets, then snap/lock the center support last.

My brackets are installed but the cassette won’t click—what now?

Brackets may be slightly out of level or not co-planar. Loosen, re-level, and re-tighten. Re-seat the cassette—hook the lip first, then press firmly at each bracket until it clicks. For swing-latch styles, be sure the arm is fully swung closed under the rail.

Is the chain tensioner required for loop controls?

Yes. The tensioner must be anchored so the loop remains taut—this is required for child safety and ensures smooth clutch operation without skipping or slack.

Need more choices? Shop our entire line of top quality window shades and see all of our layered zebra shades

Details	Standard	Guaranteed to Last	Guaranteed to Love
Pricing	FREE	$	$$
Warranty Duration
3 year limited warranty	✓	✓	✓
5 year limited warranty		✓	✓
Warranty Coverage
Defects	✓	✓	✓
Parts	✓	✓	✓
30 Day Returns(in-store credit)			✓

Details

Standard

Guaranteed to Last

Guaranteed to Love

Pricing

FREE

Warranty Duration

3 year limited warranty

✓

5 year limited warranty

✓

Warranty Coverage

Defects

✓

Parts

✓

30 Day Returns(in-store credit)

✓

Guarantee
What Is Covered Our window coverings are covered against manufacturing defects in materials or craftsmanship when used as intended, provided that: The product has been correctly measured, installed, and operated. All Blinds Chalet guidelines regarding product limitations, maintenance, and care have been followed. Who Is Eligible This warranty applies solely to the original purchaser of the product and is non-transferable. Blinds Chalet’s Responsibility If a covered defect is confirmed, Blinds Chalet will, at its discretion, repair the product, replace affected parts, or provide a comparable replacement. Costs not included: The customer is responsible for expenses related to shipping as well as any measuring, installation, removal, or reinstallation services. Labor charges, service visits, and similar costs are not covered by this warranty. What Is Not Covered Damage resulting from accidents, alterations, misuse, abuse, or neglect. Improper measurement, installation, cleaning, or maintenance. Normal wear and tear, including fading, discoloration, or deterioration from sunlight or moisture. Frayed cords, cord breakage, or reduced cord performance due to age or heavy use. Fading and normal aging of materials are expected characteristics and are not considered defects. Warranty Limitations This warranty is exclusive and replaces any other expressed or implied warranties. No Blinds Chalet employee or representative is authorized to modify or extend these terms. Blinds Chalet will not be liable for indirect, incidental, or consequential damages resulting from product use or failure. How to Request Service Blinds Chalet Customer Care [email protected] (480) 470-1127 Please include: Original proof of purchase, which can be your order number or purchase confirmation email A brief description of the issue The location of the window covering and clear photos or video of the issue Resolution on Warranties and Guarantees BlindsChalet.com reserves, at its discretion, the right to repair, replace or refund any blinds found defective. Limit 1 remake per covered product. If there are multiple blinds/shades in the same room, only the defective product will be replaced/repaired. In the event that a product, color or product feature has been discontinued and it is no longer available we will provide a substitute product as similar as possible to the original blind or shade. Shipping for warranty issues is the responsibility of the customer to and from the repair facility. Packaging on return shipments is the responsibility of the customer. If a product or component has been discontinued, Blinds Chalet will repair or replace the affected part with the closest available match in design and color.

Guarantee

What Is Covered

Our window coverings are covered against manufacturing defects in materials or craftsmanship when used as intended, provided that:

The product has been correctly measured, installed, and operated.
All Blinds Chalet guidelines regarding product limitations, maintenance, and care have been followed.

Who Is Eligible

This warranty applies solely to the original purchaser of the product and is non-transferable.

Blinds Chalet’s Responsibility

If a covered defect is confirmed, Blinds Chalet will, at its discretion, repair the product, replace affected parts, or provide a comparable replacement.

Costs not included: The customer is responsible for expenses related to shipping as well as any measuring, installation, removal, or reinstallation services. Labor charges, service visits, and similar costs are not covered by this warranty.

What Is Not Covered

Damage resulting from accidents, alterations, misuse, abuse, or neglect.
Improper measurement, installation, cleaning, or maintenance.
Normal wear and tear, including fading, discoloration, or deterioration from sunlight or moisture.
Frayed cords, cord breakage, or reduced cord performance due to age or heavy use.

Fading and normal aging of materials are expected characteristics and are not considered defects.

Warranty Limitations

This warranty is exclusive and replaces any other expressed or implied warranties. No Blinds Chalet employee or representative is authorized to modify or extend these terms.

Blinds Chalet will not be liable for indirect, incidental, or consequential damages resulting from product use or failure.

How to Request Service

Blinds Chalet Customer Care
[email protected]
(480) 470-1127

Please include:

Original proof of purchase, which can be your order number or purchase confirmation email
A brief description of the issue
The location of the window covering and clear photos or video of the issue

Resolution on Warranties and Guarantees

BlindsChalet.com reserves, at its discretion, the right to repair, replace or refund any blinds found defective. Limit 1 remake per covered product.
If there are multiple blinds/shades in the same room, only the defective product will be replaced/repaired.
In the event that a product, color or product feature has been discontinued and it is no longer available we will provide a substitute product as similar as possible to the original blind or shade.
Shipping for warranty issues is the responsibility of the customer to and from the repair facility. Packaging on return shipments is the responsibility of the customer.
If a product or component has been discontinued, Blinds Chalet will repair or replace the affected part with the closest available match in design and color.

5 Year Guaranteed to Last
Standard limited warranty extended from 3 to 5 years.

5 Year Guaranteed to Last

Standard limited warranty extended from 3 to 5 years.

5 Year Guaranteed to Love
Standard limited warranty extended from 3 to 5 years. 30 Day Returns If for any reason you are not satisfied with the window coverings and wish to return them for store credit, please notify us within 30 days of receiving the order. Our customer care department will provide a Return Goods Authorization number (RGA) and shipping address for the return. Please note, return shipping costs are the responsibility of the customer and shipping labels are not provided. Returns are for store credit only and store credit will be available immediately after the items are received (Guaranteed to Love fee is not credited).

5 Year Guaranteed to Love

Standard limited warranty extended from 3 to 5 years.
30 Day Returns
If for any reason you are not satisfied with the window coverings and wish to return them for store credit, please notify us within 30 days of receiving the order. Our customer care department will provide a Return Goods Authorization number (RGA) and shipping address for the return. Please note, return shipping costs are the responsibility of the customer and shipping labels are not provided. Returns are for store credit only and store credit will be available immediately after the items are received (Guaranteed to Love fee is not credited).